Industrial 8-Port 10/100/1000T PoE + 2-Port SFP Wall-mount Managed Switch

WGS-4215-8P2S
€435.50
IVA incluido
10 Items

Managed:  No.

Copper ports: 8 x 1000 Base-T ports.

Fiber ports: 2 x 100/1000 Base-X slots.

PoE power budget: 200 W.

PoE supply: Yes.

ERPS: No.

DIN-rail: Yes. 

Operating temperature: -40°C - 75°C.

Switch industrial 8 puertos PoE 10/100/1000 y 2 puertos SFP

Physical Port

  • 8-Port 10/100/1000BASE-T Gigabit RJ45 copper with IEEE 802.3at PoE+ Injector function.
  • 2 100/1000BASE-X mini-GBIC/SFP slots.

Power over Ethernet

  • Complies with IEEE 802.3at Power over Ethernet Plus, end-span PSE
  • Backward compatible with IEEE 802.3af Power over Ethernet
  • Up to 8 ports of IEEE 802.3af/802.3at devices powered
  • Supports PoE power up to 36 watts for each PoE port
  • Auto detects powered device (PD)
  • Circuit protection prevents power interference between ports
  • Remote power feeding up to 100 meters
  • PoE management

    - Total PoE power budget control
    - Per port PoE function enable/disable
    - PoE port power feeding priority
    - Per PoE port power limitation
    - PD classification detection
    - PD alive check
    - PoE schedule

Industrial Case and Installation

  • Compact size with fixed wall-mounted, magnetic wall-mounted or DIN-rail design
  • IP30 metal case protection
  • Supports -40 to 75 degrees C operating temperature
  • Supports ESD 8KV DC Ethernet protection
  • Dual power input design

    - 48V~56V DC wide power input with polarity reverse protect function
    - 3-pin terminal block or DC jack connector

Switching

  • Hardware based 10/100Mbps, half/full duplex and 1000Mbps full duplex mode, flow control and auto-negotiation and auto MDI/MDI-X
  • Features Store-and-Forward mode with wire-speed filtering and forwarding rates
  • IEEE 802.3x flow control for full duplex operation and back pressure for half duplex operation
  • 8K MAC address table size
  • 10K jumbo frame
  • Automatic address learning and address aging
  • Supports CSMA/CD protocol

Layer 2 Features

  • Supports VLAN

    - IEEE 802.1Q tagged VLAN
    - Provider bridging (VLAN Q-in-Q, IEEE 802.1ad) support
    - Protocol VLAN
    - Voice VLAN
    - Private VLAN (Protected port)
    - Management VLAN
    - GVRP

  • Supports Spanning Tree Protocol

- STP (Spanning Tree Protocol)
- RSTP (Rapid Spanning Tree Protocol)
- MSTP (Multiple Spanning Tree Protocol)
- STP BPDU Guard, BPDU Filtering and BPDU Forwarding

  • Supports Link Aggregation

- IEEE 802.3ad Link Aggregation Control Protocol (LACP)
- Cisco ether-channel (static trunk)

  • Provides port mirror (many-to-1)
  • Loop protection to avoid broadcast lo

Quality of Service

  • Ingress/Egress Rate Limit per port bandwidth control
  • Traffic classification

- IEEE 802.1p CoS
- TOS/DSCP/IP precedence of IPv4/IPv6 packets

  • Strict priority and Weighted Round Robin (WRR) CoS policies

Multicast

  • Supports IPv4 IGMP snooping v2, v3
  • Supports IPv6 MLD snooping v1, v2
  • IGMP querier mode support
  • IGMP snooping port filtering
  • MLD snooping port filtering

Security

  • Storm Control support

- Broadcast/Unknown unicast/Unknown multicast

  • Authentication

- IEEE 802.1X port-based network access authentication
- Built-in RADIUS client to cooperate with the RADIUS servers
- DHCP Option 82
- RADIUS/TACACS+ authentication

  • Access Control List

- IPv4/IPv6 IP-based ACL
- IPv4/IPv6 IP-based ACE
- MAC-based ACL
- MAC-based ACE

  • MAC Security

- Static MAC
- MAC filtering

  • Port security for source MAC address entries filtering
  • DHCP snooping to filter distrusted DHCP messages
  • Dynamic ARP inspection discards ARP packets with invalid MAC address to IP address binding
  • IP source guard prevents IP spoofing attacks
  • DoS attack prevention
  • SSH/SSL

Management

  • IPv4 and IPv6 dual stack management
  • Switch Management Interface

- IPv4/IPv6 Web switch management
- Telnet Command Line Interface
- SNMP v1, v2c, v3
- SSH and SSL secure access

  • User privilege levels control
  • Built-in Trivial File Transfer Protocol (TFTP) client
  • Static and DHCP for IP address assignment
  • System Maintenance

- Firmware upload/download via HTTP/TFTP
- Configuration upload/download through HTTP/TFTP
- Hardware reset button for system reboot or reset to factory default

  • SNTP Network Time Protocol
  • Cable diagnostics
  • Link Layer Discovery Protocol (LLDP) Protocol and LLDP-MED
  • SNMP trap for interface Link-up and Link-down notification
  • Event message logging to remote Syslog server
  • Four RMON groups (history, statistics, alarms and events)
Specifications

Hardware specifications

Copper Ports

Eight 10/100/1000BASE-T RJ45 auto-MDI/MDI-X ports

PoE Inject Port

Eight with 802.3at PoE+ injector function (Port-1 to Port-8)

SFP/mini-GBIC Slots

Two 100/1000BASE-X SFP interfaces, supporting 100/1000Mbps dual mode

Switch Architecture

Store-and-Forward

Switch Fabric

20Gbps/non-blocking

Switch Throughput@64 bytes

14.8Mpps @64 bytes

MAC Address Table

8K entries

Shared Data Buffer

4.1 megabits

Flow Control

IEEE 802.3x pause frame for full-duplex
Back pressure for half-duplex

Jumbo Frame

10KB

Reset Button

< 5 sec: System reboot
> 5 sec: Factory default

LED

■ Power LED: Power (Green)
■ PoE Port (Port-1 to Port-8):
 PoE-in-Use (Orange)
 LNK/ACT (Green)
■ 100/1000X SFP Ports (Port 9 to Port 10):
 1000 LNK/ACT (Green)
 100 LNK/ACT (Orange)

Connector

■ Removable 3-pin terminal block for power input
- Pin 1/2 for Power (Pin 1: V+/Pin 2: V-)
- Pin 3 for earth ground
■ DC power jack with 2.0mm central pole

Power Requirements

48~56V DC, 5A (max.) terminal block power input
48~56V DC, 5A (max.) DC jack power input
Note: The two power input interfaces don’t support power redundant function.

Power Consumption/ Dissipation

Max. 210 watts/716 BTU

Dimensions (W x D x H)

178 x 25 x 134 mm

Weight

640g

ESD Protection

Contact Discharge 6KV DC
Air Discharge 8KV DC

Enclosure

Metal

Installation

Fixed wall mount, magnetic wall mount or DIN rail

Power over Ethernet


PoE Standard

IEEE 802.3af/802.3at Power over Ethernet PSE

PoE Power Supply Type

End-span

PoE Power Output

■ IEEE 802.3af Standard
 - Per port 48V~56V DC (depending on the power supply), max. 15.4
 watts
■ IEEE 802.3at Standard
 - Per port 50V~56V DC (depending on the power supply), max. 36 watts

Power Pin Assignment

1/2(+), 3/6(-)

PoE Power Budget

200 watts (depending on power input)

Max. Number of Class 2 PDs

8

Max. Number of Class 3 PDs

8

Max. Number of Class 4 PDs

7

Layer 2 functions


Port Mirroring

TX/RX/Both
Many-to-1 monitor

VLAN

802.1Q tagged-based VLAN
Up to 256 VLAN groups, out of 4094 VLAN IDs
802.1ad Q-in-Q tunneling (VLAN stacking)
Voice VLAN
Protocol VLAN
Private VLAN (Protected port)
GVRP
Management VLAN

Link Aggregation

IEEE 802.3ad LACP and static trunk
Supports 1 groups with 2 SFP ports per trunk

Spanning Tree Protocol

IEEE 802.1D Spanning Tree Protocol (STP)
IEEE 802.1w Rapid Spanning Tree Protocol (RSTP)
IEEE 802.1s Multiple Spanning Tree Protocol (MSTP)
STP BPDU guard, BPDU filtering and BPDU forwarding

IGMP Snooping

IPv4 IGMP (v2/v3) snooping
IGMP querier
Up to 256 multicast groups

MLD Snooping

IPv6 MLD (v1/v2) snooping, up to 256 multicast groups

Access Control List

IPv4/IPv6 IP-based ACL/MAC-based ACL
IPv4/IPv6 IP-based ACE/MAC-based ACE

QoS

8 mapping IDs to 8 level priority queues 
- Port Number 
- 802.1p priority
- DSCP/IP precedence of IPv4/IPv6 packets
Traffic classification based, strict priority and WRR
Ingress/Egress Rate Limit per port bandwidth control

Security

IEEE 802.1X port-based authentication
Built-in RADIUS client to cooperate with RADIUS server
RADIUS/TACACS+ authentication
IP-MAC port binding
MAC filtering
Static MAC address
DHCP snooping and DHCP Option82
STP BPDU guard, BPDU filtering and BPDU forwarding
DoS attack prevention
ARP inspection
IP source guard
Storm control support
Broadcast/Unknown unicast/Unknown multicast

Management functions/p>

Basic Management Interfaces

Web browser; Telnet; SNMP v1, v2c, v3
Firmware upgrade by HTTP/TFTP protocol through Ethernet network
Configuration upload/download through HTTP/TFTP
Remote/Local Syslog
System log
LLDP protocol
SNTP
PLANET Smart Discovery Utility

Secure Management Interfaces

SSH, SSL, SNMP v3

SNMP MIBs

RFC 1213 MIB-II
RFC 1215 Generic Traps
RFC 1493 Bridge MIB
RFC 2674 Bridge MIB Extensions
RFC 2737 Entity MIB (version 2)
RFC 2819 RMON (1, 2, 3, 9)
RFC 2863 Interface Group MIB
RFC 3635 Ethernet-like MIB

Standards conformance


Regulatory Compliance

FCC Part 15 Class A, CE

Stability Testing

IEC 60068-2-32 (free fall)
IEC 60068-2-27 (shock)
IEC 60068-2-6 (vibration)

Standards Compliance

IEEE 802.3 10BASE-T
IEEE 802.3u 100BASE-TX/100BASE-FX
IEEE 802.3z Gigabit SX/LX
IEEE 802.3ab Gigabit 1000BASE-T
IEEE 802.3x Flow Control and Back Pressure
IEEE 802.3ad Port Trunk with LACP
IEEE 802.1D Spanning Tree Protocol
IEEE 802.1w Rapid Spanning Tree Protocol
IEEE 802.1s Multiple Spanning Tree Protocol
IEEE 802.1p Class of Service
IEEE 802.1Q VLAN Tagging
IEEE 802.1x Port Authentication Network Control
IEEE 802.1ab LLDP
RFC 768 UDP
RFC 793 TFTP
RFC 791 IP
RFC 792 ICMP
RFC 2068 HTTP
RFC 1112 IGMP v1
RFC 2236 IGMP v2
RFC 3376 IGMP v3
RFC 2710 MLD v1
RFC 3810 MLD v2


Environment


Operating

Temperature: -40 ~ 75 degrees C
Relative Humidity: 5 ~ 95% (non-condensing)

Storage

Temperature: -40 ~ 85 degrees C
Relative Humidity: 5 ~ 95% (non-condensing)

Accessories


Standard Accessories

■ Quick Installation Guide x 1
■ 3-pin Terminal Block Connector x 1
■ Wall-mounted Kit x 1
■ DIN-rail Kit x 1
■ Magnet Kit x 1
■ RJ45 Dust Cap x 8
■ SFP Dust Cap x 2

No reviews
Product added to wishlist
Product added to compare.

This website uses its own and third-party cookies fundamentally for the website to work and to obtain statistics